D-Link xStack DES-3500 Series Manual page 278

DES-3526:admin# config sim delete 1
Command: config sim delete 1
Please wait for ACK...
Success.
DES-3526:admin#
config sim
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To change the time interval of the discovery protocol:
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to configure role parameters for the SIM protocol on the Switch.
config sim [{[commander {group_name <groupname 64> |
candidate] | dp_interval <30-90> | hold_time <sec 100-255>}]
This command is used to configure parameters of switches of the SIM.
commander – Use this parameter to configure the commander switch
(CS) for the following parameters:
group_name <groupname 64> - Used to update the name of
the group. Enter an alphanumeric string of up to 64 characters
to rename the SIM group.
dp_interval <30-90> – The user may set the discovery protocol
interval, in seconds that the Switch will send out discovery
packets. Returning information to the CS will include
information about other switches connected to it. (Ex. MS,
CaS). The user may set the dp_interval from 30 to 90 seconds.
hold time <sec 100-300> – Using this parameter, the user may
set the time, in seconds, the CS will hold information sent to it
from other switches, utilizing the discovery interval protocol.
The user may set the hold time from 100 to 300 seconds.
candidate – Used to change the role of a CS (commander) to a CaS
(candidate).
dp_interval <30-90> – The user may set the discovery protocol
interval, in seconds that the Switch will send out discovery
packets. Returning information to the CS will include
information about other switches connected to it. (Ex. MS,
CaS). The user may set the dp_interval from 30 to 90 seconds.
hold time <100-255> – Using this parameter, the user may set
the time, in seconds, the Switch will hold information sent to it
from other switches, utilizing the discovery interval protocol.
The user may set the hold time from 100 to 255 seconds.
Only administrator-level users can issue this command.
DES-3526:admin# config sim commander dp_interval
30
Command: config sim commander dp_interval 30
Success.
DES-3526:admin#
274