D-Link xStack DES-3500 Series Manual page 227

To configure ARP aging time:
show arpentry
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the ARP table:
DES-3526:admin#show arpentry
Command: show arpentry
ARP Aging Time : 30
Interface
-------------
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
Total Entries = 20
DES-3526:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3526:admin#config arp_aging time 30
Command: config arp_aging time 30
Success.
DES-3526:admin#
Used to display the ARP table.
show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | [static | local]}
This command is used to display the current contents of the Switch's ARP
table.
ipif <ipif_name 12> − The name of the IP interface the end node or station for
which the ARP table entry was made, resides on.
ipaddress <ipaddr> − The network address corresponding to the IP interface
name above.
static – Displays the static entries to the ARP table.
local – Displays the local entries in the ARP table.
None.
IP Address
---------------
10.0.0.0
10.1.1.169
10.1.1.254
10.9.68.1
10.9.68.4
10.10.27.51
10.11.22.145
10.11.94.10
10.14.82.24
10.15.1.60
10.17.42.153
10.19.72.100
10.21.32.203
10.40.44.60
10.42.73.221
10.44.67.1
10.47.65.25
10.50.8.7
10.90.90.90
10.255.255.255
MAC Address
-----------------
FF-FF-FF-FF-FF-FF
00-50-BA-70-E4-4E
00-01-30-FA-5F-00
00-A0-C9-A4-22-5B
00-80-C8-2E-C7-45
00-80-C8-48-DF-AB
00-80-C8-93-05-6B
00-10-83-F9-37-6E
00-50-BA-90-37-10
00-80-C8-17-42-55
00-80-C8-4D-4E-0A
00-50-BA-38-7D-5E
00-80-C8-40-C1-06
00-50-BA-6B-2A-1E
00-01-02-03-04-00
00-50-BA-DA-02-51
00-50-BA-DA-03-2B
00-E0-18-45-C7-28
00-01-02-03-04-00
FF-FF-FF-FF-FF-FF
223
Type
---------------
Local/Broadcast
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Local
Local/Broadcast