Table of Contents
Advertisement
config lldp dot1_tlv_pvid
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the vlan name TLV from the outbound LLDP advertisements for all ports:
DES-3526:admin#config lldp ports all dot1_tlv_pvid enable
Command: config lldp ports all dot1_tlv_pvid enable
Success.
DES-3526:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to configure an individual port or group of ports to exclude one or
more of IEEE 802.1 Organizationally port vlan ID TLV data types come
from outbound LLDP advertisements.
config lldp ports [<portlist>|all] dot1_tlv_pvid [enable | disable]
This TLV optional data type determines whether the IEEE 802.1
organizationally defined port VLAN TLV transmission is allowed on a
given LLDP transmission capable port.
portlist - Specified a range of ports to be configured. (UnitID:port
number).
all - To set all ports in the system, you may use the "all" parameter.
dot1_tlv_pvid - This TLV optional data type determines whether the IEEE
802.1 organizationally defined port VLAN ID TLV transmission is allowed
on a given LLDP transmission capable port. The default state is disable.
Only Administrator or Operator – level users can issue this command.
289
Advertisement
Table of Contents
