D-Link xStack DES-3500 Series Manual page 21

DES-3526:admin#telnet 10.53.13.99 tcp_port 23
Command: telnet 10.53.13.99 tcp_port 23
enable web
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable HTTP and configure port number:
DES-3526:admin#enable web 80
Command: enable web 80
Success.
DES-3526:admin#
disable web
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable HTTP:
DES-3526:admin#disable web
Command: disable web
Success.
DES-3526:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to enable the HTTP-based management software on the Switch.
enable web <tcp_port_number 1-65535>
This command is used to enable the Web-based management software
on the Switch. The user can specify the TCP port number the Switch will
use to listen for Telnet requests.
<tcp_port_number 1-65535> − The TCP port number. TCP ports are
numbered between 1 and 65535. The "well-known" port for the Web-
based management software is 80.
Only Administrator and Operator-level users can issue this command.
Used to disable the HTTP-based management software on the
Switch.
disable web
This command disables the Web-based management software on
the Switch.
None.
Only Administrator and Operator-level users can issue this
command.
17