D-Link xStack DES-3500 Series Manual page 262

config ssh user
Restrictions
Example usage:
To configure the SSH user:
DES-3526:admin# config ssh user Trinity authmode
Password
Command: config ssh user Trinity authmode Password
Success.
DES-3526:admin#
show ssh user authmode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SSH user:
DES-3526:admin#show ssh user
Command: show ssh user
Current Accounts:
UserName
------------------
Trinity
DES-3526:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
SSH user.
password – This parameter should be chosen to use an administrator
defined password for authentication.
publickey – This parameter should be chosen to use the publickey on
a SSH server for authentication.
Only administrator-level users can issue this command.
Used to display the SSH user setting.
show ssh user authmode
This command allows users to display the current SSH user setting.
None.
Only administrator-level users can issue this command.
Note: To configure the SSH user, the administrator must create a user
account on the Switch. For information concerning configuring a user
account, please see the section of this manual entitled Basic Switch
Commands and then the command, create account.
Authentication
------------------
Publickey
258