xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
create account
config account
show account
delete account
show config
show session
show switch
show switch_mode
show device status
show module_info
show serial_port
config serial_port
enable clipaging
disable clipaging
enable telnet
disable telnet
enable web
disable web
save
reboot
reset
login
logout
Each command is listed, in detail, in the following sections.
Parameters
[admin | user] <username 15>
<username 15>
<username 15>
[current_config | config_in_NVRAM]
{baud_rate [115200] auto_logout [never | 2_minutes | 5_minutes |
10_minutes | 15_minutes]}
<tcp_port_number 1-65535>
<tcp_port_number 1-65535>
{[log | all]}
{[config | system]}
10
B
S
ASIC
WITCH
4
C
OMMANDS