D-Link xStack DES-3500 Series Manual page 297

config lldp forward_message
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the LLDP forward_lldpdu:
DES-3526:admin# config lldp forward_ message
Command: config lldp forward_ message
Success.
DES-3526:admin#
show lldp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the LLDP system level configuration status:
DES-3526:admin#show lldp
Command: show lldp
LLDP system information
LLDP Configurations
DES-3526:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to configure forwarding of lldpdu packet when LLDP is disabled.
config lldp forward_message [enable | disable]
When lldp is disabled and lldp forward_message is enabled, the
received LLDPDU packet will be forwarded. The default state is disable.
None.
Only Administrator or Operator – level users can issue this command.
This command displays the switch's general LLDP configuration status.
show lldp
This command displays the switch's general LLDP configuration status.
None.
None.
Chassis Id Subtype
Chassis Id
System Name
System Description
System Capabilities
LLDP Status
LLDP Forward Status
Message Tx Interval
Message Tx Hold Muliplier : 4
ReInit delay
Tx Delay
Notification Interval
enable
: MACADDRESS
: 00-15-E9-41-5A-A7
: D-Link
: Fast Ethernet Switch
: Repeater, Bridge,
: Disable
: Disable
: 30
: 2
: 2
: 5
293
enable