D-Link xStack DES-3500 Series Manual page 246

show authen_enable
Restrictions
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
DES-3526:admin#show authen_enable all
Command: show authen_enable all
Method List Name
----------------
Permit
default
Total Entries : 2
DES-3526:admin#
config authen application
Purpose
Syntax
Description
Parameters
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
queried for authentication when a user attempts to log on to the
Switch. Priority ranges from 1(highest) to 4 (lowest).
Method Name – Defines which security protocols are
implemented, per method list name.
Comment – Defines the type of Method. User-defined Group
refers to server groups defined by the user. Built-in Group refers
to the TACACS, XTACACS, TACACS+ and RADIUS security
protocols which are permanently set in the Switch. Keyword refers
to authentication using a technique INSTEAD of
TACACS/XTACACS/TACACS+/RADIUS which are local
(authentication through the local_enable password on the Switch)
and none (no authentication necessary to access any function on
the Switch).
User Account Command Level – Administrator.
Priority
--------
1
2
3
4
1
2
Used to configure various applications on the Switch for
authentication using a previously configured method list.
config authen application [console | telnet | ssh | http | all]
[login | enable] [default | method_list_name <string 15>]
This command is used to configure Switch configuration
applications (console, telnet, ssh, web) for login at the user level
and at the administration level (authen_enable) utilizing a
previously configured method list.
application – Choose the application to configure. The user may
choose one of the following five options to configure.
console – Choose this parameter to configure the
command line interface login method.
telnet – Choose this parameter to configure the telnet
login method.
ssh – Choose this parameter to configure the Secure
Shell login method.
http – Choose this parameter to configure the web
interface login method.
all – Choose this parameter to configure all applications
Method Name
-------------
tacacs+
tacacs
Darren
local
tacacs+
local
242
Comment
---------------
Built-in Group
Built-in Group
User-defined Group
Keyword
Built-in Group
Keyword