D-Link xStack DES-3500 Series Manual page 46

create snmp group
Restrictions
Example usage:
To create an SNMP group named "sg1:"
DES-3526:admin#create snmp group sg1 v3 noauth_nopriv
read_view v1 write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view
v1 write_view v1 notify_view v1
Success.
DES-3526:admin#
delete snmp group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named "sg1".
DES-3526:admin#delete snmp group sg1
Command: delete snmp group sg1
Success.
DES-3526:admin#
show snmp groups
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP groups on the Switch:
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
SNMP manager is allowed to access on the Switch.
Only Administrator and Operator-level users can issue this command.
Used to remove an SNMP group from the Switch.
delete snmp group <groupname 32>
The delete snmp group command is used to remove an SNMP
group from the Switch.
<groupname 32> − An alphanumeric name of up to 32 characters that
will identify the SNMP group the new SNMP user will be associated
with.
Only Administrator and Operator-level users can issue this command.
Used to display the group-names of SNMP groups currently configured on
the Switch. The security model, level, and status of each group are also
displayed.
show snmp groups
The show snmp groups command displays the group-names of SNMP
groups currently configured on the Switch. The security model, level, and
status of each group are also displayed.
None.
None.
42