D-Link xStack DES-3500 Series Manual page 83

config stp
Restrictions
Example usage:
To configure STP with maxage 18 and maxhops of 15:
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
txholdcount <1-10> - The maximum number of BPDU Hello packets
transmitted per interval. Default value = 6.
fbpdu [enable | disable] − Allows the forwarding of STP BPDU packets
from other network devices when STP is disabled on the Switch. The
default is enable.
Only Administrator and Operator-level users can issue this command.
DES-3526:admin#config stp maxage 18 maxhops 15
Command: config stp maxage 18 maxhops 15
Success.
DES-3526:admin#
79