D-Link xStack DES-3500 Series Manual page 131

Command
create address_binding
ip_mac ipaddress
config address_binding
ip_mac ipaddress
config address_binding
ip_mac ports
config address_binding
ip_mac ports
config address_binding
ip_mac ports
show address_binding
delete address_binding
enable address_binding
acl_mode
disable address_binding
acl_mode
enable address_binding
trap_log
disable address_binding
trap_log
show address_binding
dhcp_snoop
enable address_binding
dhcp_snoop
disable address_binding
dhcp_snoop
clear address_binding
dhcp_snoop
binding_entry ports
config address_binding
dhcp_snoop max_entry
ports
create address_binding
permit_ip_pool start_ip
config address_binding
permit_ip_pool start_ip
delete address_binding
permit_ip_pool start_ip
show address_binding
permit_ip_pool
Each command is listed, in detail, in the following sections.
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Parameters
<ipaddr> mac_address <macaddr> {ports [<portlist> | all] | mode {arp | acl]}
<ipaddr> mac_address <macaddr> {ports [<portlist> | all] | mode {arp | acl]}
[<portlist> | all] state [enable {[strict | loose]} | disable ]
[<portlist> | all] allow_zeroip [eable|disable]
[<portlist> | all] forward_dhcppkt [enable | disable]
[ip_mac {[all | ipaddress <ipaddr> mac_address <macaddr>]} | blocked {[all |
vlan_name <vlan_name> mac_address <macaddr>]} | ports]
[ip-mac [ipaddress <ipaddr> mac_address <macaddr> |all] | blocked [all |
vlan_name <vlan_name> mac_address <macaddr>]]
{[max_entry {ports <portlist> | binding_entry {port <port>}]}
[<portlist> | all]
[<portlist> | all] limit [<value 1-10> | no_limit]
<ipaddr> end_ip <ipaddr> ports [<portlist>|all]
<ipaddr> end_ip <ipaddr> ports [<portlist>|all]
<ipaddr> end_ip <ipaddr>
127