D-Link xStack DES-3500 Series Manual page 99

1 default
CTRL+C ESC q
config multicast port_filtering_mode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the multicast filtering mode to forward all groups on ports 1 through 4.
DES-3526:admin#config multicast port_filtering_mode 1-4
forward_all_groups
Command: config multicast port_filtering_mode 1-4
forward_all_groups
Success.
DES-3526:admin#
show multicast port_filtering_mode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the multicast port filtering mode for all ports:
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
00-02-3F-63-DD-68
Quit SPACE n Next Page
Used to configure the multicast packet filtering mode on a port per
port basis.
config multicast port_filtering_mode [<portlist> | all]
[forward_all_groups | forward_unregistered_groups |
filter_unregistered_groups]
This command will configure the multicast packet filtering mode for
specified ports on the Switch.
<portlist> - Specifies a port or range of ports to view.
[forward_all_groups | forward_unregistered_groups |
filter_unregistered_groups] – The user may set the filtering mode to
any of these three options
Only Administrator and Operator-level users can issue this
command.
Used to show the multicast packet filtering mode on a port per port
basis.
show multicast port_filtering_mode {<portlist>}
This command will display the current multicast packet filtering
mode for specified ports on the Switch.
<portlist> - Specifies a port or range of ports to view.
None.
10
ENTER Next Entry a
95
Dynamic
All