D-Link xStack DES-3500 Series Manual page 186

config 802.1x guest_vlan ports
Restrictions
Example usage:
To configure the ports for a previously created 802.1x Guest VLAN as enabled.
DES-3526:admin#config 802.1x guest_vlan ports 1-5 state
enable
Command: config 802.1x guest_vlan ports 1-5 state enable
Success.
DES-3526:admin#
show 802.1x guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the configurations for a previously created 802.1x Guest VLAN.
DES-3526:admin#show 802.1x guest_vlan
Command: show 802.1x guest_vlan
Guest VLAN Setting
-----------------------------------------------------------
Guest VLAN : Trinity
Enable guest VLAN ports: 5-8
Success.
DES-3526:admin#
delete 802.1x guest_vlan
Purpose
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Guest VLAN.
all – Specify this parameter to configure all ports for the 802.1x Guest VLAN.
state [enable | disable] – Use these parameters to enable or disable port
listed here as enabled or disabled for the 802.1x Guest VLAN.
User Account Command Level – Administrator and Operator
This VLAN is only supported for port-based 802.1x and must have already
been previously created using the create vlan command. If the specific port
state changes from an enabled state to a disabled state, these ports will
return to the original VLAN.
Used to view the configurations for a 802.1x Guest VLAN.
show 802.1x guest_vlan
The show 802.1x guest_vlan command is used to display the
settings for the VLAN that has been enabled as an 802.1x Guest
VLAN. Guest 802.1X VLAN clients are those who have not been
authorized for 802.1x or they haven't yet installed the necessary
802.1x software, yet would still like limited access rights on the
Switch.
None.
User Account Command Level – Administrator, Operator, and User.
This VLAN is only supported for port-based 802.1x and must have
already been previously created using the create vlan command.
Only one VLAN can be set as the 802.1x Guest VLAN.
Used to delete a 802.1x Guest VLAN.
182