D-Link xStack DES-3500 Series Manual page 296

config lldp dot3_tlvs
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the MAC/PHY configuration/status TLV from the outbound LLDP advertisements for all ports:
DES-3526:admin#config lldp ports all dot3_tlvs
mac_phy_configuration_status enable
Command: config lldp ports all dot3_tlvs
mac_phy_configuration_status enable
Success.
DES-3526:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to configure an individual port or group of ports to exclude one or
more of IEEE 802.3 organization specific TLV data types from outbound
LLDP advertisements.
config lldp ports [<portlist>|all] dot3_tlvs [all |
{mac_phy_configuration_status | link_aggregation |
maximum_frame_size}] [enable | disable]
Each Specific TLV in this extension can be enabled individually.
portlist - Specified a range of ports to be configured. (UnitID:port
number).
all - To set all ports in the system, you may use the "all" parameter.
mac_phy_configuration_status - This TLV optional data type indicates
that LLDP agent should transmit 'MAC/PHY configuration/status TLV'.
This type indicates it is possible for two ends of an IEEE 802.3 link to be
configured with different duplex and/or speed settings and still establish
some limited network connectivity. More precisely, the information
includes whether the port support the auto-negotiation function, whether
the function is enabled, the auto-negotiated advertised capability, and the
operational MAU type. The default state is disable.
link_aggregation - This TLV optional data type indicates that LLDP agent
should transmit 'Link Aggregation TLV'. This type indicates the current
link aggregation status of IEEE 802.3 MACs. More precisely, the
information should include whether the port is capable of doing link
aggregation, whether the port is aggregated in a aggregated link, and the
aggregated port ID. The default state is disable.
maximum_frame_size - This TLV optional data type indicates that LLDP
agent should transmit 'Maximum-frame-size TLV. The default state is
disable .
Only Administrator or Operator – level users can issue this command.
292