D-Link xStack DES-3500 Series Manual page 117

DES-3526:admin#
delete vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove the VLAN "v1":
DES-3526:admin#delete vlan v1
Command: delete vlan v1
Success.
DES-3526:admin#
config vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add 4 through 8 as tagged ports to the VLAN v1:
DES-3526:admin#config vlan v1 add tagged 4-8
Command: config vlan v1 add tagged 4-8
Success.
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to delete a previously configured VLAN on the Switch.
delete vlan <vlan_name 32>
This command will delete a previously configured VLAN on the
Switch.
<vlan_name 32> − The VLAN name of the VLAN to delete.
User Account Command Level – Administrator and Operator.
Used to add additional ports to a previously configured VLAN.
config vlan <vlan_name 32> {[add [tagged | untagged |
forbidden] | delete] <portlist> | advertisement [enable | disable]}
This command allows the user to add ports to the port list of a
previously configured VLAN. The user can specify the additional ports
as tagging, untagging, or forbidden. The default is to assign the ports
as untagging.
<vlan_name 32> − The name of the VLAN to which to add ports.
add − Entering the add parameter will add ports to the VLAN. There
are three types of ports to add:
• tagged − Specifies the additional ports as tagged.
• untagged − Specifies the additional ports as untagged.
• forbidden − Specifies the additional ports as forbidden
delete − Deletes ports from the specified VLAN.
<portlist> − A port or range of ports to add to, or delete from the
specified VLAN.
advertisement [enable | disable] − Enables or disables GVRP on the
specified VLAN.
User Account Command Level – Administrator and Operator.
113