Gratuitous Arp Commands - D-Link xStack DES-3500 Series Manual

The Gratuitous ARP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
config gratuitous_arp send
ipif_status_up
config gratuitous_arp send
dup_ip_detected
config gratuitous_arp learning
enable gratuitous_arp
disable gratuitous_arp
config gratuitous_arp send
periodically ipif
show gratuitous_arp
Each command is listed, in detail, in the following sections.
config gratuitous_arp send ipif_status_up
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable a gratuitous ARP request:
DES-3526:admin#config gratuitous_arp send ipif_status_up enable
Command: config gratuitous_arp send ipif_status_up enable
Success.
DES-3526:admin#
config gratuitous_arp send duplicate_ip_detected
Purpose
Syntax
Description
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Parameters
[enable | disable]
[enable|disable]
[enable|disable]
{ipif <ipif_name 12>} {trap |log }
{ipif <ipif_name 12>} {trap |log}
<ipif_name 12> interval <value 0-65535>
{ipif <ipif_name 12>}
Used to enable/disable send gratuitous ARP request while the IP
interface status is up.
config gratuitous_arp send ipif_status_up [enable | disable]
The command is used to enable/disable sending of gratuitous ARP
request packet while IPIF interface is up. This is used to automatically
announce the interface's IP address to other nodes. By default, the state
is enabled, and only one gratuitous ARP packet will be broadcast.
enable - Enable sending of gratuitous ARP when IPIF status is up.
disable - Disable sending of gratuitous ARP when IPIF status is up.
Only Administrator or Operator – level users can issue this command.
Used to enable/disable the sending of gratuitous ARP requests while
duplicate IP addresses are detected
config gratuitous_arp send duplicate_ip_detected [enable|disable]
The command is used to enable/disable sending of gratuitous ARP
request packets while duplicate IPs are detected. By default, the state is
enabled. For this command, the duplicate IP detected means that the
G
RATUITOUS
309
43
ARP C
OMMANDS