D-Link xStack DES-3500 Series Manual page 39

delete snmp user
Restrictions
Example usage:
`To delete a previously entered SNMP user on the Switch:
DES-3526: DES-3526:admin#delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-3526:admin#
show snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SNMP users currently configured on the Switch:
DES-3526:admin#show snmp user
Command: show snmp user
Username
---------
initial
Total Entries: 1
DES-3526:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Only Administrator and Operator-level users can issue this
command.
Used to display information about each SNMP username in the
SNMP group username table.
show snmp user
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
None.
None.
Group Name SNMP Version
----------- ------------
initial
Auth-Protocol
--------------
V3 None
35
PrivProtocol
------------
None