D-Link xStack DES-3500 Series Manual page 47

DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3526:admin#show snmp groups
Command: show snmp groups
Vacm Access
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Total Entries: 5
DES-3526:admin#
create snmp host
Purpose Used to create a recipient of SNMP traps generated by the Switch's
SNMP agent.
create snmp host <ipaddr> [v1 | v2c | v3 [noauth_nopriv |
Syntax
auth_nopriv | auth_priv] <auth_string 32>]
Description The create snmp host command creates a recipient of SNMP traps
generated by the Switch's SNMP agent.
<ipaddr> − The IP address of the remote management station that will
Parameters
serve as the SNMP host for the Switch.
v1 – Specifies that SNMP version 1 will be used. The Simple Network
Management Protocol (SNMP), version 1, is a network management
protocol that provides a means to monitor and control network devices.
v2c – Specifies that SNMP version 2c will be used. The SNMP v2c
supports both centralized and distributed network management
strategies. It includes improvements in the Structure of Management
Information (SMI) and adds some security features.
Table Settings
Name : Group3
: ReadView
: WriteView
: NotifyView
: SNMPv3
: NoAuthNoPriv
Name : Group4
: ReadView
: WriteView
: NotifyView
: SNMPv3
: authNoPriv
Name : Group5
: ReadView
: WriteView
: NotifyView
: SNMPv3
: authNoPriv
Name : initial
: restricted
:
: restricted
: SNMPv3
: NoAuthNoPriv
Name : ReadGroup
: CommunityView
:
: CommunityView
: SNMPv1
: NoAuthNoPriv
43