1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
GARP Timers
Clicking the G
ARP
(Figure
5-64), which displays the various parameters for changing Garp times. The
parameters for this page are shown in
Table 5-48. Garp Timers Configuration Page Parameters
Parameter
Port No
Garp Join Time
(msecs)
Garp Leave Time
(msecs)
Garp Leave All Time
(msecs)
Figure 5-64. Garp Timers Configuration Page
T
tab brings up the G
IMERS
Description
This parameter displays the Port Number.
This parameter configures GARP join time in milli seconds. The value ranges
from 1 to 1073741810. The default value is 200 milli seconds.
This parameter configures GARP leave time in milli seconds. The value ranges
from 1 to 2147483630.The default value is 600 milli seconds.
This parameter configures GARP leave all time in milli seconds. The value
ranges from 1 to 2147483640.The default value is 10000 milli seconds.
T
C
ARP
IMERS
Table
5-48.
5-80
page
ONFIGURATION