Group - Supermicro SSE-G24-TG4 Configuration Manual

SNMP Configuration Guide
SMIS# show snmp user
Engine ID: 80.00.08.1c.04.46.53
User: user5
Authentication Protocol: MD5
Privacy Protocol: DES_CBC
Storage Type: Volatile
Row Status: Active
------------------------------
Engine ID: 80.00.08.1c.04.46.53
User: initial
Authentication Protocol: None
Privacy Protocol: None
Storage Type: Volatile
Row Status: Active
------------------------------
Engine ID: 80.00.08.1c.04.46.53
User: templateMD5
Authentication Protocol: MD5
Privacy Protocol: None
Storage Type: Volatile
Row Status: Active
------------------------------
Engine ID: 80.00.08.1c.04.46.53
User: templateSHA
Authentication Protocol: SHA
Privacy Protocol: DES_CBC
Storage Type: Volatile
Row Status: Active
------------------------------

1.6.4 Group

A group identifies a set of users in SNMPv3.
Follow the steps below to configure an SNMP group.
Step Command
Step 1
configure terminal
Step 2 snmp group <GroupName> user <UserName>
security-model {v1 | v2c | v3 } [{volatile |
nonvolatile}]
Description
Enters the configuration mode
Configures the SNMP group.
GroupName – Alphanumeric value with
a maximum of 40 characters.
Security-model – Use v1 or v2c or v3.
UserName - Alphanumeric value with a
Supermicro L2/L3 Switches Configuration Guide 15