Radius - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Clicking the L
OCAL
C
ONFIGURATION
accounts. You need more than privilege Level_5 to view all pages and need more than
privilege Level_10 for changing the configurations. The highest, Level_15, is for
Administrator privilege.
Any one of the configured users can be specified as ADMIN user.
The current active users are displayed with session, user name and peer address
details.

Radius

Clicking the R
ADIUS
This page allows you to configure the RADIUS server parameters as shown in
Table 5-4.
Table 5-4. RADIUS Server Configuration Page Parameters
Parameter
Server ID
IP Address
U tab brings up the M
SERS
page (Figure 5-8). This page allows you to create or delete local user
Figure 5-9. Radius Server Configuration Page
tab brings up the R
Description
This parameter specifies the unique identifier of the RADIUS Server Entry using
a 2-characters input limit. The allowed value range is from 1 to 10. The factory
default is blank.
This parameter specifies the IP Address of the RADIUS Server. The factory
default is blank.
U
ANAGEMENT
S C
ADIUS ERVER ONFIGURATION
5-18
A
SER CCOUNT
page (Figure 5-9).