Chapter 10 Connecting The M10I Router To External Devices; Tools And Parts Required To Connect The M10I Router To External Devices - Juniper M10i Hardware Manual

CHAPTER 10
Connecting the M10i Router to External
Devices

Tools and Parts Required to Connect the M10i Router to External Devices

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com
Tools and Parts Required to Connect the M10i Router to External Devices on page 61
Connecting to a Management Console or Auxiliary Device on page 62
Connecting to a Network for Out-of-Band Management on page 62
Connecting M10i PIC Cables on page 63
To connect the router to management devices and PICs, you need the following tools
and parts:
Phillips (+) screwdrivers, numbers 1 and 2
Flat-blade (-) screwdrivers, 2.5 mm for the connecting to the
port on a Routing Engine and 3 mm
AUX/MODEM
Electrostatic damage (ESD) grounding wrist strap
Preventing Electrostatic Discharge Damage to an M10i Router on page 150
Connecting to a Management Console or Auxiliary Device on page 62
Connecting to a Network for Out-of-Band Management on page 62
Connecting M10i PIC Cables on page 63
port or
CONSOLE
61