BGP Commands
•
You must restart the peer (using the
before the new hold time interval takes effect.
•
Both values must be set at the same time.
•
Entering this command without the variables resets the variables to their default value.
Examples
-> ip bgp neighbor 172.22.2.115 timers 80 240
-> ip bgp neighbor 172.22.2.115 timers
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp neighbor conn-retry-
interval
MIB Objects
alaBgpPeerTable
alaBgpPeerAddr
bgpPeerHoldTimeConfigured
bgpPeerKeepAliveConfigured
OmniSwitch CLI Reference Guide
ip bgp neighbor clear
The interval, in seconds, between BGP retries to set up a connec-
tion through the transport protocol with another peer.
March 2011
ip bgp neighbor timers
command) after issuing this command
page 19-63