Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1132

show ip bgp aggregate-address
output definitions (continued)
As-Set or Aggregate as-set
Admin State or
Aggregate admin state
Oper State or
Aggregate oper state
Aggregate metric
Aggregate local preference
Aggregate community string
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp aggregate-address
MIB Objects
alabgpMIBAggrGroup
alaBgpAggrSet
alaBgpAggrLocalPref
alaBgpAggrMetric
alaBgpAggrSummarize
alaBgpAggrCommunity
page 19-164
Indicates whether AS path aggregate is enabled or disabled. This value
is configured through the
Indicates whether this aggregate route is administratively enabled or
disabled. This value is configured through the
address admin-state command.
Indicates whether this aggregate route is operational and participating
in BGP message exchanges.
The multi-exit discriminator (MED) value configured for this aggre-
gate route. This value is configured through the
address metric command.
The local preference value for this aggregate route. This value is con-
figured through the ip bgp aggregate-address local-preference
mand.
The community string value for this aggregate route. This value is con-
figured through the ip bgp aggregate-address community
Creates and deletes a BGP aggregate route.
ip bgp aggregate-address as-set
ip bgp aggregate-
ip bgp aggregate-
OmniSwitch CLI Reference Guide
BGP Commands
command.
com-
command.
March 2011