Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1137

BGP Commands
output definitions (continued)
Neighbor next hop self
Neighbor Route Refresh
Neighbor Ipv4 unicast
Neighbor Ipv4 multicast
Neighbor type
Neighbor auto-restart
Neighbor route-reflector-
client
Neighbor confederation status Indicates whether this peer is a member of a BGP confederation. This
Neighbor remove private AS
Neighbor default originate
Neighbor maximum prefixes
Neighbor max prefixes
warning
# of prefixes received
Neighbor MD5 key [32- 47]
Neighbor local port
Neighbor TCP window size
Graceful Restart State
Advertised Restart Interval
OmniSwitch CLI Reference Guide
Indicates whether this peer is using next hop processing. This value is
configured through the
Indicates whether this peer supports Route Refresh capability as
defined in RFC 2918. This capability is an alternative to soft-reconfig-
uration that can save CPU and memory resources. It allows peers to
dynamically request the re-advertisement of BGP routing tables. Since
this router supports route refresh all BGP peers are automatically
enabled for this capability.
Indicates whether this peer is multi-protocol IP version 4 unicast capa-
ble. This router is IPv4 unicasts capable so all peers will be enabled for
this capability.
Indicates whether this peer is multi-protocol IP version 4 multicast
capable. This router is not IPv4 multicasts capable so all peers will be
disabled for this capability.
Indicates whether this peer is internal or external to the router.
Indicates whether peer auto-restart is enabled or disabled. This value is
configured through the
Indicates whether this peer is a client to the local route reflector, if
configured. This value is configured through the
route-reflector-client
value is configured through the
mand.
Indicates whether the stripping of private AS numbers (64512 to
65535) from AS paths is enabled or disabled. This value is configured
through the ip bgp neighbor remove-private-as
Indicates whether peer default origination is enabled or disabled.
When enabled, the local BGP speaker advertises itself as a default to
the peer. This value is configured through the
default-originate
The maximum number of prefixes the local router can receive in
UPDATE from this peer. This value is configured through the
neighbor maximum-prefix
Indicates whether a warning will be issued when this peer exceeds 80
percent of the maximum prefix value. This value is configured through
the ip bgp neighbor update-source
Displays the total number of prefixes received by this neighbor.
When present, shows an encrypted version of the MD5 password.
When not present, and MD5 password has not been configured. This
value is configured through the
The TCP port used for the session with this peer.
The size of the TCP window for this BGP session. This value will
always be 32768 as that is the maximum size of a BGP message.
Indicates the graceful restart state. This feature is not supported in
Multiprotocol BGP.
Indicates the restart interval in seconds.
March 2011
ip bgp neighbor next-hop-self
ip bgp neighbor auto-restart
command.
ip bgp confederation neighbor
command.
command.
command.
ip bgp neighbor md5 key
show ip bgp neighbors
command.
command.
ip bgp neighbor
com-
command.
ip bgp neighbor
ip bgp
command.
page 19-169