Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1138

show ip bgp neighbors
output definitions (continued)
Forwarding State during
restart
Activate IPv6 unicast
Configured IPv6 NextHop
Address
Neighbor Ipv6 unicast
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp neighbor
MIB Objects
alabgpMIBPeerGroup
alaBgpPeerAddr
alaBgpPeerAS
alaBgpPeerPassive
alaBgpPeerName
alaBgpPeerMultiHop
alaBgpPeerMaxPrefix
alaBgpPeerMaxPrefixWarnOnly
alaBgpPeerNextHopSelf
alaBgpPeerSoftReconfig
alaBgpPeerInSoftReset
alaBgpPeerIpv4Unicast
alaBgpPeerIpv4Multicast
alaBgpPeerRcvdRtRefreshMsgs
alaBgpPeerSentRtRefreshMsgs
alaBgpPeerRouteMapOut
alaBgpPeerRouteMapIn
alaBgpPeerLocalAddr
alaBgpPeerLastDownReason
alaBgpPeerLastDownTime
alaBgpPeerLastReadTime
alaBgpPeerRcvdNotifyMsgs
alaBgpPeerSentNotifyMsgs
alaBgpPeerLastSentNotifyReason
alaBgpPeerLastRecvNotifyReason
alaBgpPeerRcvdPrefixes
alaBgpPeerDownTransitions
alaBgpPeerType
alaBgpPeerAutoReStart
alaBgpPeerClientStatus
alaBgpPeerConfedStatus
alaBgpPeerRemovePrivateAs
alaBgpPeerClearCounter
alaBgpPeerTTL
page 19-170
Indicates whether the peer has preserved the forwarding state
during the graceful restart.
Indicates if the IPv6 unicast updates are enabled or not. Options
include enabled or disabled.
Specifies the IPv6 nexthop address. This is specified using the
bgp neighbor ipv6-nexthop
Indicates whether Multiprotocol IPv6 Unicast capability is
enabled or disabled between the peers.
Creates or deletes a BGP peer.
command.
OmniSwitch CLI Reference Guide
BGP Commands
ipv6
March 2011