Configure Reboot-Loop-Protection Backup-Msm Use Master Configuration - Extreme Networks ExtremeWare Command Reference Manual

configure reboot-loop-protection backup-msm use master configuration

configure reboot-loop-protection backup-msm use master
configuration
configure reboot-loop-protection backup-msm threshold use-master-config
Description
Configures the slave MSM to use the global reboot-loop-protection configuration.
Syntax Description
Configures the slave MSM to use the global reboot-loop-protection configuration.
user-master-c
onfig
Default
Disabled
Usage Guidelines
To view the current settings, use the or commands.
show switch show configuration
If you reboot the switch manually or use the or commands, the
run msm-failover run diagnostics
time interval and count are both reset to 0.
Example
The following command configures the slave MSM to use the global reboot-loop-protection
configuration:
configure reboot-loop-protection backup-msm threshold use-master-config
History
This command was first available in ExtremeWare 7.7.
Platform Availability
This command is available on Black Diamond switches.
ExtremeWare 7.7 Command Reference Guide 1243