Troubleshooting Commands
For ExtremeWare 6.2:
• If you specify UDP as the protocol, the
and
options are not
from <source>
with <record-route>
supported.
Example
The following command enables continuous ICMP echo messages to be sent to a remote host:
ping continuous 123.45.67.8
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 6.1 to support the
,
, and
hostname
from
with
parameters, and incremental packets.
record-route
This command was modified in ExtremeWare 6.2 to support UDP.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1250
ExtremeWare 7.7 Command Reference Guide