Extreme Networks ExtremeWare Command Reference Manual page 1277

1 Pair A
Pair B
Pair C
Pair D
The following example shows none of the twisted pairs terminate successfully at port 1:
Summit400-48t:29 # run diagnostics cable ports 1
Cable Diagnostics has completed, to view results enter
show port <port list> cable diagnostics
Summit400-48t:30 # show port 1 cable diagnostics
Port
1 Pair A
Pair B
Pair C
Pair D
History
This command was introduced in ExtremeWare 7.2e.
Platform Availability
This command is available only on "i" series platforms.
ExtremeWare 7.7 Command Reference Guide
3 meters
2 meters
1 meters
1 meters
Pair Length
0 meters
0 meters
0 meters
0 meters
Terminated
Terminated
Open or Short
Open or Short
Status
Open or Short
Open or Short
Open or Short
Open or Short
show ports cable diagnostics
1277