Extreme Networks ExtremeWare Command Reference Manual page 1264

Troubleshooting Commands
udp-forwarding Specifies UDP forwarding level.
NOTE: This option is available only on the "i" series switches.
vrrp Specifies VRRP level.
vrrp-hello Specifies VRRP hello level.
xp Specifies XP level.
NOTE: This option is available only on the "i" series switches.
wireless ports Specifies wireless ports debug trace level.
vlan name Specifies a VLAN name.
Default
N/A
Usage Guidelines
Use this command to display the debug trace level configured for a particular system and VLAN. Some
of the debug trace systems commands can be applied to a particular VLAN, and some apply to the
switch as a whole. Therefore, the
Example
The following command displays the debug trace levels configured:
show debug-trace
Following is the output from this command:
OSPF SPF
Flowstats
Vlan
---------------------------------------------------------------------------
v49
Port Number
---------------------------------------------------------------------------
No port-based debug-tracing configured
History
This command was first available in ExtremeWare 6.1.
Beginning in ExtremeWare 7.1.0, many debug trace facilities were moved to EMS.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
1264
option is not available with all systems.
vlan
3
3
Debug
DVMRP route
Debug
Level
3
Level
ExtremeWare 7.7 Command Reference Guide