Show Flowstats - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

show flowstats

show flowstats <portlist>
Description
Displays status information for the flow statistics function for specified ports.
NOTE
This command is available only on the "i" series switches.
Syntax Description
portlist Specifies a list of ports or slots and ports for which flow statistics should be displayed. May be in the
form 1, 2, 3-5, 2:5, 2:6-2:8.
Default
N/A
Usage Guidelines
This command displays flowstats configuration information for an individual port. The information is
displayed in a format similar to the flowstats command syntax. The following information is displayed:
• Whether the flowstats feature is enabled or disabled
• Whether flowstats is enabled or disabled for the specified port
• NetFlow Timeout configuration for the port
• Whether NetFlow Filters are enable or disabled for the port
• NetFlow filter specifications for the port
Example
The following command displays statistics for ports 1, 40, and 48:
Summit48i: show flowstats 1, 40, 48
Flowstats enabled
Port Filter
--------------------------------------------------------------------------------
1 3 IP
DestIP: 10.203.0.1/255.255.255.255
SrcIP: any
40 8
Dest/Src Info: match-all-flows
48 1 TCP
DestIP: 10.201.26.0/
SrcIP: 10.201.31.0/
788
proto timeout group
5
- 5
20
255.255.255.0
255.255.255.0
OverflowPkts
3 N/A
DestPort: any
SrcPort: any
1 N/A
1 N/A
DestPort: any
SrcPort: any
flags
EIA
EIA
EIA
ExtremeWare 7.7 Command Reference Guide