Show Netlogin - Extreme Networks ExtremeWare Command Reference Manual

show netlogin

show netlogin {port <portlist> vlan <vlan name>}
Description
Shows status information for network login.
Syntax Description
portlist
vlan name
Default
N/A
Usage Guidelines
This command provides the following information:
• Whether network login is enabled or disabled
• The base-URL
• The default redirect page
• The logout privileges setting
• The netlogin session-refresh setting and time
• The MAC and IP address of supplicants
• The type of authentication, 802.1x or HTTP (web-based)
Examples
The following command shows the summary network login information:
show netlogin
The command generates output similar to the following:
Netlogin Authentication Mode :
------------------------------------------------
Web-based Mode Global Configuration
------------------------------------------------
Base-URL
Default-Redirect-Page
Logout-privilege
Netlogin Session-Refresh
------------------------------------------------
------------------------------------------------
802.1x Mode Global Configuration
------------------------------------------------
ExtremeWare 7.7 Command Reference Guide
Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and
ports. On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5,
2:5, 2:6-2:8.
Specifies the name of a VLAN.
web-based ENABLED ; 802.1x ENABLED
: "network-access.net"
: "http://www.extremenetworks.com"
: YES
: DISABLED ; 3 minutes
show netlogin
1077