Enable Netlogin Ports - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

enable netlogin ports

enable netlogin ports <portlist> vlan <vlan name>

Enables network login on a specified port in a VLAN.

Syntax Description

Usage Guidelines

The VLAN you specify must exist and include the specified ports prior to enabling network login. Only

untagged ports are allowed to be configured for network login.

For campus mode login with web-based clients, the following conditions must be met:

• A DHCP server must be available, and a DHCP range must be configured for the port or ports in the

VLAN on which you want to enable network login.

• The switch must be configured as a RADIUS client, and the RADIUS server must be configured to

enable the Extreme network login capability.

For ISP mode login, no special conditions are required. A RADIUS server must be used for

authentication.

Network login is used on a per-port, per-VLAN basis. On the "i" series switches, a port that is tagged

can belong to more than one VLAN. In this case, network login can be enabled on one port for each

Windows authentication is not supported via network login.

The following command configures network login on port 9 in VLAN corp:

enable netlogin ports 9 vlan corp

This command was first available in ExtremeWare 6.2.

This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.7 Command Reference Guide

Specifies the ports for which network login should be enabled.

Specifies the VLAN on whose ports network login should be enabled.

enable netlogin ports

Extremeware 7.7