Enable Web Http - Extreme Networks ExtremeWare Command Reference Manual

enable web http

enable web http
enable web http
Description
Enables HTTP access to the switch on the default HTTP port (80).
Syntax Description
This command has no parameters or variables.
Default
Enabled
Usage Guidelines
Use this command to enable HTTP access to the switch web pages.
Example
The following command enables HTTP on the default port:
enable web http
History
This command was first available in ExtremeWare 6.2a.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e; it was added to
the "i" series of switches in ExtremeWare 7.3.0.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide 1049