Show Access-Mask - Extreme Networks ExtremeWare Command Reference Manual

show access-mask

show access-mask {<name>}
Description
Displays information about a specific access mask or all access masks.
NOTE
This command is available only on the "e" series switches.
Syntax Description
name Specifies an access mask name.
Default
N/A
Usage Guidelines
None
Example
The following command shows information about the access mask called MyIpMask.
show MyIpMask
The command generates output similar to the following:
Access-mask with name "MyIpMask" created by user
MAC:
IP/mask:L4port:
Layer 2:
Layer 3/4:
Ports:
Precedence:
ACL/Rate-limit:
History
This command was first available in ExtremeWare 7.1e.
Platform Availability
This command is available on the "e" series platforms only.
ExtremeWare 7.7 Command Reference Guide
show access-mask
1063