Configure Debug-Trace Debug-Link - Extreme Networks ExtremeWare Command Reference Manual

configure debug-trace debug-link

configure debug-trace debug-link <debug level>
Description
This command records debug information to the syslog.
Syntax Description
debug level
Default
The default level is 0.
Usage Guidelines
The
debug level
debug-trace for link detection.
For levels 2 through 5, no additional information is recorded.
Example
The following command enables debug-trace for link detection:
configure debug-trace debug-link 1
The following command disables debug-trace for link detection:
configure debug-trace debug-link 0
History
This command was first available in ExtremeWare 6.2.2b108.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies a debug level:
0 — Disables debug tracing for debug link and stops recording information to the syslog.
1 — Enables debug tracing for debug link and records information to the syslog.
2 — No additional information recorded.
3 — No additional information recorded.
4 — No additional information recorded.
5 — No additional information recorded.
range is 0 to 5. Level 0 disables the debug-trace for link detection, and level 1 enables
configure debug-trace debug-link
1171