unconfigure enhanced-dos-protect rate-limit
unconfigure enhanced-dos-protect rate-limit drop-probability ports 4
The following command resets the rate limiting learn window on ports 2 and 3 to the default value, 10
seconds:
unconfigure enhanced-dos-protect rate-limit learn-window ports 2,3
The following command resets the rate limiting protocol to the default value, ICMP packet types, on
ports 1 through 3:
unconfigure enhanced-dos-protect rate-limit protocol ports 1-3
The following command removes ports 1 through 4 from rate limiting:
unconfigure enhanced-dos-protect rate-limit ports 1-4
History
This command was first available in ExtremeWare 7.3.0.
This command was added to the Summit "e" series of switches in 7.3e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
1113