Disable Iparp Refresh - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

IP Unicast Commands

disable iparp refresh

Disables IP ARP to refresh its IP ARP entries before timing out.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

IP ARP refresh can only be disabled if IP forwarding is disabled. The purpose of disabling ARP refresh

is to reduce ARP traffic in a high node count layer 2 switching only environment.

The following command disables IP ARP refresh:

disable iparp refresh

This command was first available in ExtremeWare 6.2.

This command was added to the "e" series of switches in ExtremeWare 7.2e.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.7 Command Reference Guide

Extremeware 7.7