Disable Icmp Redirects - Extreme Networks ExtremeWare Command Reference Manual

disable icmp redirects

disable icmp redirects
disable icmp redirects {vlan <vlan name>}
Description
Disables generation of ICMP redirect messages on one or all VLANs.
Syntax Description
vlan name Specifies a VLAN name.
Default
Enabled
Usage Guidelines
This option only applies to the switch when the switch is not in routing mode.
Example
The following command disables ICMP redirects from VLAN accounting:
disable icmp redirects vlan accounting
History
This command was available in ExtremeWare 2.0.
This command was modified in an ExtremeWare IP Technology Services Release based on
ExtremeWare v6.1.8b12 to support MPLS modules.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide 1701