Unconfigure Netlogin Dot1X Guest-Vlan - Extreme Networks ExtremeWare Command Reference Manual

unconfigure netlogin dot1x guest-vlan

unconfigure netlogin dot1x guest-vlan {ports <port-list>}
Description
This command unconfigures the guest VLAN feature for 802.1x authentication netlogin.
Syntax Description
port-list Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports.
On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8. If the ports keyword is not used, the command applies to all ports.
Default
N/A
Usage Guidelines
If you do not specify any ports, the command applies to all ports.
Example
The following example unconfigures the guest VLAN feature for all ports:
unconfigure netlogin dot1x guest-vlan
The following example unconfigures the guest VLAN feature for ports 3 and 5:
unconfigure netlogin dot1x guest-vlan ports 3,5
History
This command was first available in ExtremeWare 7.6.
Platform Availability
This command is available on all platforms except the Altitude 300 Access Point.
ExtremeWare 7.7 Command Reference Guide
unconfigure netlogin dot1x guest-vlan
1115