Extreme Networks ExtremeWare Command Reference Manual page 1281

show tech-support
This command also displays the output from internal debug commands. This command disables the
CLI paging feature.
This information can be useful for your technical support representative if you experience a problem.
Depending on the software version running on your switch, additional or different show command
output is displayed.
Use the form of the command to display output related to wireless
show tech-support wireless
only.
Example
The following command displays all the show command output on the switch:
show tech-support all
History
This command was first available in ExtremeWare 6.1.9.
This command was modified to capture the command output in ExtremeWare 6.22.
show ipmc fdb
This command was modified to provide the and keywords in ExtremeWare 7.3.0.
brief all
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide 1281