Configuration and Image Commands
use configuration
use configuration [primary | secondary]
Description
Configures the switch to use a previously saved configuration on the next reboot.
Syntax Description
primary
Specifies the primary saved configuration.
secondary
Specifies the secondary saved configuration.
Default
N/A
Usage Guidelines
The keyword
configuration
To view information about the configuration selected for the next reboot, use the
command.
Example
The following command specifies that the next reboot should use the primary saved configuration:
use configuration primary
History
This command was available in ExtremeWare 2.0.
Support for the
parameter was introduced in ExtremeWare 7.0.0. The
slot
applicable to the Alpine and BlackDiamond chassis.
Support for the
keyword was introduced in ExtremeWare 7.1.0.
all
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Support for the
and
slot
Platform Availability
This command is available on all platforms.
1162
can be abbreviated to
keywords was removed in ExtremeWare 7.4.
all
.
config
<slot>
show switch
parameter is
ExtremeWare 7.7 Command Reference Guide