Enable Radius - Extreme Networks ExtremeWare Command Reference Manual

enable radius

enable radius
enable radius
Description
Enables the RADIUS client on the switch.
Syntax Description
This command has no arguments or variables.
Default
Disabled
Usage Guidelines
When enabled, all web and CLI logins are sent to the RADIUS servers for authentication. When used
with a RADIUS server that supports ExtremeWare CLI authorization, each CLI command is sent to the
RADIUS server for authorization before it is executed.
Example
The following command enables RADIUS authentication for the switch:
enable radius
History
This command was first available in ExtremeWare 4.1.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide 1039