Enable Netlogin Dot1X Guest-Vlan Ports - Extreme Networks ExtremeWare Command Reference Manual

enable netlogin dot1x guest-vlan ports

enable netlogin dot1x guest-vlan ports [all | <port-list>]
Description
Enables a guest VLAN for the specified 802.1x netlogin ports.
Syntax Description
all
<port-list>
Default
By default, the guest VLAN is disabled.
Usage Guidelines
Before you can enable the guest VLAN on the specified ports, the guest VLAN must have been
configured on those ports.
The guest VLAN is not supported on wireless ports.
To disable the guest VLAN, use the following command:
disable netlogin dot1x guest-vlan ports [all | <port-list>]
Example
The following command enables the guest VLAN on ports 3 and 5:
enable netlogin dot1x guest-vlan ports 3,5
The following command globally enables the guest VLAN:
enable netlogin dot1x guest-vlan ports all
History
This command was first available in ExtremeWare 7.6.
Platform Availability
This command is available on all platforms except the Altitude 300 Access Point.
ExtremeWare 7.7 Command Reference Guide
Enables the guest VLAN on all ports.
Specifies one or more ports or slots and ports on which the guest VLAN is enabled. On a
modular switch, can be a list of slots and ports. On a stand-alone switch, can be one or more
port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
enable netlogin dot1x guest-vlan ports
1033