Disable Netlogin Session-Refresh - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Security Commands

disable netlogin session-refresh

Disables network login session refresh.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

Network login sessions can refresh themselves after a configured timeout. After the user has been

logged in successfully, a logout window opens which can be used to close the connection by clicking on

the LogOut link. Any abnormal closing of this window is detected on the switch and the user is logged

out after a time interval as configured for session refresh. The session refresh is enabled and set to five

minutes by default.

This command applies only to the web-based authentication mode of network login.

The following command disables network login session refresh:

disable netlogin session-refresh

This command was first available in ExtremeWare 7.0.

This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.7 Command Reference Guide

Extremeware 7.7