Security Commands
show auth
show auth
Description
Displays the current authentication and accounting servers configured for management and netlogin
sessions.
Syntax Description
There are no arguments or variables for this command.
Default
Shows all authentication server information for the switch.
Usage Guidelines
The output from this command displays the information about the type of authentication and
accounting used by the primary and secondary servers that are configured for that particular type of
session.
Example
The following example displays the authentication information:
show auth
The output of the command is similar to:
Session Type : mgmt-access
Authentication Server Type
Primary Authentication Server
Secondary Authentication Server : None
Primary Accounting Server
Secondary Accounting Server
Default configuration :
Using Radius servers for Authentication/Accounting
Primary Authentication Server
History
This command was first available in ExtremeWare 7.3.0 and ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
1068
: Radius
: 12.16.1.2
: None
: None
: 172.16.1.2
ExtremeWare 7.7 Command Reference Guide