Disable Source-Ip-Lockdown Ports - Extreme Networks ExtremeWare Command Reference Manual

disable source-ip-lockdown ports

disable source-ip-lockdown ports [all | <portlist>]
From ExtremeWare 7.7, this command is modified to:
disable ip-security source-ip-lockdown ports [all | <portlist>]
Description
Disables the source IP lockdown feature on one or more ports.
Syntax Description
port-list
all
Default
By default source IP lockdown is disabled.
Usage Guidelines
None.
Example
The following command enables source IP lockdown on ports 1 to 10 and 15
disable ip-security source-ip-lockdown ports 1-10, 15
History
This command was first available in ExtremeWare 7.4.
This command is modifed in ExtremeWare 7.7.0. The new command is:
disable ip-security source-ip-lockdown ports [all | <portlist>]
Both the commands can be used in ExtremeWare 7.7.0.
Platform Availability
This command is available on all platforms
ExtremeWare 7.7 Command Reference Guide
Specifies the ports to which the command applies.
Specifies all ports.
disable source-ip-lockdown ports
1007