Extreme Networks ExtremeWare Command Reference Manual page 1184

Hide thumbs Also See for ExtremeWare:

Table of Contents

Troubleshooting Commands

<DBUG:EAPS> eaps_runtime.c 804: EAPS-PDU Transmit OK, Vlan="c1"

<DBUG:EAPS> eaps_runtime.c 779: Sending EAPS pdu out port (1:2) vlan "c1" vlanId=10

<DBUG:EAPS> eaps_runtime.c 1295: EAPS "man1" Hello Timer expired.

<DBUG:EAPS> eaps_runtime.c 1673: Complete state unchanged, EAPS="man1"

<DBUG:EAPS> eaps_runtime.c 931: Pdu="Health-Pdu", EAPS="man1" [MAC=00:01:30:33:14:00],

RcvdSeq#=14850, CurrSeq#

This command was first available in ExtremeWare 6.1.9.

Platform Availability

This command is available on"i" platforms only.

ExtremeWare 7.7 Command Reference Guide

Extremeware 7.7