Show Radius-Accounting - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

show radius-accounting

show radius-accounting {[<ipaddress> | <hostname>]}
Description
Displays the current RADIUS accounting client configuration and statistics.
Syntax Description
ipaddress Specifies the IP address of the RADIUS server for which information is being displayed (optional).
hostname Specifies the name of the host for which RADIUS server information is being displayed.
Default
N/A
Usage Guidelines
The output from this command displays:
• The status of the RADIUS accounting (enabled or disabled).
• The statistics for the configured primary and secondary servers.
If you specify the
ipaddress
Example
The following command displays RADIUS accounting client configuration and statistics:
show radius-accounting
Following is the output from this command:
Radius Accounting: enabled
Radius Acct Server Connect Timeout sec: 3
Primary radius accounting server:
Server name: 172.17.1.104
IP address: 172.17.1.104
Server IP Port: 1646
Client address: 172.17.1.221
Shared secret:
Acct Requests:0
Secondary radius accounting server:
Server name: 172.17.1.123
IP address: 172.17.1.123
Server IP Port: 1646
Client address: 172.17.1.221
Shared secret:
Acct Requests:0
The following is an example of output from this command:
Radius Accounting: disabled
1084
option, configuration and statistics for that server are displayed.
lf|nki
Acct Responses:0
lf|nki
Acct Responses:0
Acct Retransmits:0
Acct Retransmits:0
Timeouts:0
Timeouts:0
ExtremeWare 7.7 Command Reference Guide