IP Unicast Commands
configure vlan upd-profile
configure vlan <vlan name> udp-profile <profile_name>
Description
Assigns a UDP-forwarding profile to the source VLAN.
Syntax Description
vlan name
Specifies a VLAN name.
profile_name
Specifies a UDP profile name.
Default
N/A
Usage Guidelines
After the UDP profile has been associated with the VLAN, the switch picks up any broadcast UDP
packets that match the user-configured UDP port number, and forwards those packets to the
user-defined destination. If the UDP port is the DHCP/BOOTP port number, appropriate
BOOTP/DHCP proxy functions are invoked.
Example
The following command assigns a UDP profile to VLAN accounting:
configure vlan accounting udp-profile port_34_to_server
History
This command was first available in ExtremeWare 4.0.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1692
ExtremeWare 7.7 Command Reference Guide